ENGLISH
Given the unprecedented uncertainty caused by the global pandemic, Evertis, a global film producer known primarily for food applications, reminds the industry of their portfolio for medical applications such as face-shields. As this situation is dynamic and uncertain, Evertis is pleased to provide materials to produce essential personal protective equipment that promotes the health and well-being of workers, patients and society in general.
With worldwide distribution, Evertis supports customers throughout Europe and the Americas. In order to meet increasing demands of PETG films for face shields to protect against the COVID-19 virus, Evertis is starting up a new line, at their plant in Portugal, adding 12,000 tons per year. Line is due to initiate production in October of this year.
The IMG Group’s expansion plans are global. The Portuguese-based group also installed new capacity in their other two plants, Curitiba, Brazil and Monterrey, Mexico. Both plants increased capacity by 10,000 tons per year, Brazil as of April 2020 and Mexico just recently in August. Regarding the United States market, the convenient location of the Monterrey, Mexico facility allows the rapid response required to support the critical need for high quality, optical grade materials. Furthermore, additional capacity within the United States is in process for 2021.
Evertis’ expertise has helped guide the optimal fit and function of these materials for PPE (personal protective equipment):
- PET
- PETG
- GAG
Calibers available range from 7 mil to 35 mil. All structures can be supplied with anti-fog and anti-block additives.
Due to the Evertis’ coextrusion capabilities, the available raw material options are versatile with 100% virgin resin or virgin resin in combination with recycled content.
Evertis products are considered essential goods to support not only the food packaging industry, but also healthcare applications. Evertis has maintained normal operations and supported employee wellbeing throughout the pandemic while implementing critical precautions in response to the increased demand for hygiene, health care and food packaging products.
PET is fully recyclable and Evertis is committed to give PET a second life while guaranteeing it meets the quality and performance each application requires. PET face shields not only protect our front-line workers, but they are an environmentally friendly solution supporting a circular economy and providing the additional benefits of C02 and energy consumption reductions.
Reduction in environmental pollution and emissions as waste is reused
Material for insulation purposes
High durability
Easy to store and transport
Simple and low-cost technique
A sustainable future isn’t possible without PET, and since everyone’s health is paramount, Evertis is ensuring there is little disruption to the supply chain of PET films.
More than 14 communities and 128 families participated
1,725 eco-bricks were recollected
8,000 USD in vouchers for supermarkets were distributed to the families who participated – a huge relief in COVID times
110,350 m2 of waste was recycled
More than 110,350 m2 of constructions will be built
Evertis, present in the polymers industry since 1959 and pioneers in PET film extrusion, is a specialist in the production of barrier films for food packaging, and other packaging applications. With a wide variety of tailor-made solutions in their portfolio, Evertis focuses on supplying films that ensure product safety whilst closing the loop. Evertis envisions a future with increased utilisation of recycled content in their films, greater recyclability of their products and the lowest feasible carbon footprint.
Being a global business, with manufacturing sites in Portugal, Brazil, Italy and Mexico, Evertis is devoted to playing a role in society’s collective response to the global plastic waste challenge, through recycling education programs as well as jointly working across the value chain to create tangible solutions. Their mission is to develop future-fit packaging that meets the highest expectations of clients and end consumers in terms of food safety, functionality and circularity.
Given the unprecedented uncertainty caused by the global pandemic, Evertis, a global film producer known primarily for food applications, reminds the industry of their portfolio for medical applications such as face-shields. As this situation is dynamic and uncertain, Evertis is pleased to provide materials to produce essential personal protective equipment that promotes the health and well-being of workers, patients and society in general.
With worldwide distribution, Evertis supports customers throughout Europe and the Americas. In order to meet increasing demands of PETG films for face shields to protect against the COVID-19 virus, Evertis is starting up a new line, at their plant in Portugal, adding 12,000 tons per year. Line is due to initiate production in October of this year.
The IMG Group’s expansion plans are global. The Portuguese-based group also installed new capacity in their other two plants, Curitiba, Brazil and Monterrey, Mexico. Both plants increased capacity by 10,000 tons per year, Brazil as of April 2020 and Mexico just recently in August. Regarding the United States market, the convenient location of the Monterrey, Mexico facility allows the rapid response required to support the critical need for high quality, optical grade materials. Furthermore, additional capacity within the United States is in process for 2021.
Evertis’ expertise has helped guide the optimal fit and function of these materials for PPE (personal protective equipment):
- PET
- PETG
- GAG
Calibers available range from 7 mil to 35 mil. All structures can be supplied with anti-fog and anti-block additives.
Due to the Evertis’ coextrusion capabilities, the available raw material options are versatile with 100% virgin resin or virgin resin in combination with recycled content.
Evertis products are considered essential goods to support not only the food packaging industry, but also healthcare applications. Evertis has maintained normal operations and supported employee wellbeing throughout the pandemic while implementing critical precautions in response to the increased demand for hygiene, health care and food packaging products.
PET is fully recyclable and Evertis is committed to give PET a second life while guaranteeing it meets the quality and performance each application requires. PET face shields not only protect our front-line workers, but they are an environmentally friendly solution supporting a circular economy and providing the additional benefits of C02 and energy consumption reductions.
A sustainable future isn’t possible without PET, and since everyone’s health is paramount, Evertis is ensuring there is little disruption to the supply chain of PET films.
Evertis, present in the polymers industry since 1959 and pioneers in PET film extrusion, is a specialist in the production of barrier films for food packaging, and other packaging applications. With a wide variety of tailor-made solutions in their portfolio, Evertis focuses on supplying films that ensure product safety whilst closing the loop. Evertis envisions a future with increased utilisation of recycled content in their films, greater recyclability of their products and the lowest feasible carbon footprint.
Being a global business, with manufacturing sites in Portugal, Brazil, Italy and Mexico, Evertis is devoted to playing a role in society’s collective response to the global plastic waste challenge, through recycling education programs as well as jointly working across the value chain to create tangible solutions. Their mission is to develop future-fit packaging that meets the highest expectations of clients and end consumers in terms of food safety, functionality and circularity.
Given the unprecedented uncertainty caused by the global pandemic, Evertis, a global film producer known primarily for food applications, reminds the industry of their portfolio for medical applications such as face-shields. As this situation is dynamic and uncertain, Evertis is pleased to provide materials to produce essential personal protective equipment that promotes the health and well-being of workers, patients and society in general.
With worldwide distribution, Evertis supports customers throughout Europe and the Americas. In order to meet increasing demands of PETG films for face shields to protect against the COVID-19 virus, Evertis is starting up a new line, at their plant in Portugal, adding 12,000 tons per year. Line is due to initiate production in October of this year.
The IMG Group’s expansion plans are global. The Portuguese-based group also installed new capacity in their other two plants, Curitiba, Brazil and Monterrey, Mexico. Both plants increased capacity by 10,000 tons per year, Brazil as of April 2020 and Mexico just recently in August. Regarding the United States market, the convenient location of the Monterrey, Mexico facility allows the rapid response required to support the critical need for high quality, optical grade materials. Furthermore, additional capacity within the United States is in process for 2021.
Evertis’ expertise has helped guide the optimal fit and function of these materials for PPE (personal protective equipment):
- PET
- PETG
- GAG
Calibers available range from 7 mil to 35 mil. All structures can be supplied with anti-fog and anti-block additives.
Due to the Evertis’ coextrusion capabilities, the available raw material options are versatile with 100% virgin resin or virgin resin in combination with recycled content.
Evertis products are considered essential goods to support not only the food packaging industry, but also healthcare applications. Evertis has maintained normal operations and supported employee wellbeing throughout the pandemic while implementing critical precautions in response to the increased demand for hygiene, health care and food packaging products.
PET is fully recyclable and Evertis is committed to give PET a second life while guaranteeing it meets the quality and performance each application requires. PET face shields not only protect our front-line workers, but they are an environmentally friendly solution supporting a circular economy and providing the additional benefits of C02 and energy consumption reductions.
Evertis, present in the polymers industry since 1959 and pioneers in PET film extrusion, is a specialist in the production of barrier films for food packaging, and other packaging applications. With a wide variety of tailor-made solutions in their portfolio, Evertis focuses on supplying films that ensure product safety whilst closing the loop. Evertis envisions a future with increased utilisation of recycled content in their films, greater recyclability of their products and the lowest feasible carbon footprint.
Being a global business, with manufacturing sites in Portugal, Brazil, Italy and Mexico, Evertis is devoted to playing a role in society’s collective response to the global plastic waste challenge, through recycling education programs as well as jointly working across the value chain to create tangible solutions. Their mission is to develop future-fit packaging that meets the highest expectations of clients and end consumers in terms of food safety, functionality and circularity.
Given the unprecedented uncertainty caused by the global pandemic, Evertis, a global film producer known primarily for food applications, reminds the industry of their portfolio for medical applications such as face-shields. As this situation is dynamic and uncertain, Evertis is pleased to provide materials to produce essential personal protective equipment that promotes the health and well-being of workers, patients and society in general.
With worldwide distribution, Evertis supports customers throughout Europe and the Americas. In order to meet increasing demands of PETG films for face shields to protect against the COVID-19 virus, Evertis is starting up a new line, at their plant in Portugal, adding 12,000 tons per year. Line is due to initiate production in October of this year.
The IMG Group’s expansion plans are global. The Portuguese-based group also installed new capacity in their other two plants, Curitiba, Brazil and Monterrey, Mexico. Both plants increased capacity by 10,000 tons per year, Brazil as of April 2020 and Mexico just recently in August. Regarding the United States market, the convenient location of the Monterrey, Mexico facility allows the rapid response required to support the critical need for high quality, optical grade materials. Furthermore, additional capacity within the United States is in process for 2021.
Evertis’ expertise has helped guide the optimal fit and function of these materials for PPE (personal protective equipment):
- PET
- PETG
- GAG
Calibers available range from 7 mil to 35 mil. All structures can be supplied with anti-fog and anti-block additives.
Due to the Evertis’ coextrusion capabilities, the available raw material options are versatile with 100% virgin resin or virgin resin in combination with recycled content.
Evertis products are considered essential goods to support not only the food packaging industry, but also healthcare applications. Evertis has maintained normal operations and supported employee wellbeing throughout the pandemic while implementing critical precautions in response to the increased demand for hygiene, health care and food packaging products.
PET is fully recyclable and Evertis is committed to give PET a second life while guaranteeing it meets the quality and performance each application requires. PET face shields not only protect our front-line workers, but they are an environmentally friendly solution supporting a circular economy and providing the additional benefits of C02 and energy consumption reductions.
A sustainable future isn’t possible without PET, and since everyone’s health is paramount, Evertis is ensuring there is little disruption to the supply chain of PET films.
Evertis, present in the polymers industry since 1959 and pioneers in PET film extrusion, is a specialist in the production of barrier films for food packaging, and other packaging applications. With a wide variety of tailor-made solutions in their portfolio, Evertis focuses on supplying films that ensure product safety whilst closing the loop. Evertis envisions a future with increased utilisation of recycled content in their films, greater recyclability of their products and the lowest feasible carbon footprint.
Being a global business, with manufacturing sites in Portugal, Brazil, Italy and Mexico, Evertis is devoted to playing a role in society’s collective response to the global plastic waste challenge, through recycling education programs as well as jointly working across the value chain to create tangible solutions. Their mission is to develop future-fit packaging that meets the highest expectations of clients and end consumers in terms of food safety, functionality and circularity.
Given the unprecedented uncertainty caused by the global pandemic, Evertis, a global film producer known primarily for food applications, reminds the industry of their portfolio for medical applications such as face-shields. As this situation is dynamic and uncertain, Evertis is pleased to provide materials to produce essential personal protective equipment that promotes the health and well-being of workers, patients and society in general.
With worldwide distribution, Evertis supports customers throughout Europe and the Americas. In order to meet increasing demands of PETG films for face shields to protect against the COVID-19 virus, Evertis is starting up a new line, at their plant in Portugal, adding 12,000 tons per year. Line is due to initiate production in October of this year.
The IMG Group’s expansion plans are global. The Portuguese-based group also installed new capacity in their other two plants, Curitiba, Brazil and Monterrey, Mexico. Both plants increased capacity by 10,000 tons per year, Brazil as of April 2020 and Mexico just recently in August. Regarding the United States market, the convenient location of the Monterrey, Mexico facility allows the rapid response required to support the critical need for high quality, optical grade materials. Furthermore, additional capacity within the United States is in process for 2021.
Evertis’ expertise has helped guide the optimal fit and function of these materials for PPE (personal protective equipment):
- PET
- PETG
- GAG
Calibers available range from 7 mil to 35 mil. All structures can be supplied with anti-fog and anti-block additives.
Due to the Evertis’ coextrusion capabilities, the available raw material options are versatile with 100% virgin resin or virgin resin in combination with recycled content.
Evertis products are considered essential goods to support not only the food packaging industry, but also healthcare applications. Evertis has maintained normal operations and supported employee wellbeing throughout the pandemic while implementing critical precautions in response to the increased demand for hygiene, health care and food packaging products.
PET is fully recyclable and Evertis is committed to give PET a second life while guaranteeing it meets the quality and performance each application requires. PET face shields not only protect our front-line workers, but they are an environmentally friendly solution supporting a circular economy and providing the additional benefits of C02 and energy consumption reductions.
Evertis, present in the polymers industry since 1959 and pioneers in PET film extrusion, is a specialist in the production of barrier films for food packaging, and other packaging applications. With a wide variety of tailor-made solutions in their portfolio, Evertis focuses on supplying films that ensure product safety whilst closing the loop. Evertis envisions a future with increased utilisation of recycled content in their films, greater recyclability of their products and the lowest feasible carbon footprint.
Being a global business, with manufacturing sites in Portugal, Brazil, Italy and Mexico, Evertis is devoted to playing a role in society’s collective response to the global plastic waste challenge, through recycling education programs as well as jointly working across the value chain to create tangible solutions. Their mission is to develop future-fit packaging that meets the highest expectations of clients and end consumers in terms of food safety, functionality and circularity.
Given the unprecedented uncertainty caused by the global pandemic, Evertis, a global film producer known primarily for food applications, reminds the industry of their portfolio for medical applications such as face-shields. As this situation is dynamic and uncertain, Evertis is pleased to provide materials to produce essential personal protective equipment that promotes the health and well-being of workers, patients and society in general.
With worldwide distribution, Evertis supports customers throughout Europe and the Americas. In order to meet increasing demands of PETG films for face shields to protect against the COVID-19 virus, Evertis is starting up a new line, at their plant in Portugal, adding 12,000 tons per year. Line is due to initiate production in October of this year.
The IMG Group’s expansion plans are global. The Portuguese-based group also installed new capacity in their other two plants, Curitiba, Brazil and Monterrey, Mexico. Both plants increased capacity by 10,000 tons per year, Brazil as of April 2020 and Mexico just recently in August. Regarding the United States market, the convenient location of the Monterrey, Mexico facility allows the rapid response required to support the critical need for high quality, optical grade materials. Furthermore, additional capacity within the United States is in process for 2021.
Evertis’ expertise has helped guide the optimal fit and function of these materials for PPE (personal protective equipment):
- PET
- PETG
- GAG
Calibers available range from 7 mil to 35 mil. All structures can be supplied with anti-fog and anti-block additives.
Due to the Evertis’ coextrusion capabilities, the available raw material options are versatile with 100% virgin resin or virgin resin in combination with recycled content.
Evertis products are considered essential goods to support not only the food packaging industry, but also healthcare applications. Evertis has maintained normal operations and supported employee wellbeing throughout the pandemic while implementing critical precautions in response to the increased demand for hygiene, health care and food packaging products.
PET is fully recyclable and Evertis is committed to give PET a second life while guaranteeing it meets the quality and performance each application requires. PET face shields not only protect our front-line workers, but they are an environmentally friendly solution supporting a circular economy and providing the additional benefits of C02 and energy consumption reductions.
Rationalising the use of energy and natural resources and act on the processes in order to optimise and reduceconsumption.
Reducing the production of waste by increasing and promoting recycling and recovering material wheneverpossible.
Ensuring that materials and procedures used don’t present any risk to the health of workers and to the environment.
Making sure that the use of materials, resources and the incorporation of safe and innovative technologies promoteenvironmental protection and minimise the environmental impacts.
Coaching and engaging employees to perform in a conscious and responsible manner, for the importance ofeveryone in guaranteeing product safety and for improving environmental performance.
Implementing good practices in order to comply with applicable legislation and other requirements that will leadto the environmental preservation.
A sustainable future isn’t possible without PET, and since everyone’s health is paramount, Evertis is ensuring there is little disruption to the supply chain of PET films.
Evertis, present in the polymers industry since 1959 and pioneers in PET film extrusion, is a specialist in the production of barrier films for food packaging, and other packaging applications. With a wide variety of tailor-made solutions in their portfolio, Evertis focuses on supplying films that ensure product safety whilst closing the loop. Evertis envisions a future with increased utilisation of recycled content in their films, greater recyclability of their products and the lowest feasible carbon footprint.
Being a global business, with manufacturing sites in Portugal, Brazil, Italy and Mexico, Evertis is devoted to playing a role in society’s collective response to the global plastic waste challenge, through recycling education programs as well as jointly working across the value chain to create tangible solutions. Their mission is to develop future-fit packaging that meets the highest expectations of clients and end consumers in terms of food safety, functionality and circularity.
Given the unprecedented uncertainty caused by the global pandemic, Evertis, a global film producer known primarily for food applications, reminds the industry of their portfolio for medical applications such as face-shields. As this situation is dynamic and uncertain, Evertis is pleased to provide materials to produce essential personal protective equipment that promotes the health and well-being of workers, patients and society in general.
With worldwide distribution, Evertis supports customers throughout Europe and the Americas. In order to meet increasing demands of PETG films for face shields to protect against the COVID-19 virus, Evertis is starting up a new line, at their plant in Portugal, adding 12,000 tons per year. Line is due to initiate production in October of this year.
The IMG Group’s expansion plans are global. The Portuguese-based group also installed new capacity in their other two plants, Curitiba, Brazil and Monterrey, Mexico. Both plants increased capacity by 10,000 tons per year, Brazil as of April 2020 and Mexico just recently in August. Regarding the United States market, the convenient location of the Monterrey, Mexico facility allows the rapid response required to support the critical need for high quality, optical grade materials. Furthermore, additional capacity within the United States is in process for 2021.
Evertis’ expertise has helped guide the optimal fit and function of these materials for PPE (personal protective equipment):
- PET
- PETG
- GAG
Calibers available range from 7 mil to 35 mil. All structures can be supplied with anti-fog and anti-block additives.
Due to the Evertis’ coextrusion capabilities, the available raw material options are versatile with 100% virgin resin or virgin resin in combination with recycled content.
Evertis products are considered essential goods to support not only the food packaging industry, but also healthcare applications. Evertis has maintained normal operations and supported employee wellbeing throughout the pandemic while implementing critical precautions in response to the increased demand for hygiene, health care and food packaging products.
PET is fully recyclable and Evertis is committed to give PET a second life while guaranteeing it meets the quality and performance each application requires. PET face shields not only protect our front-line workers, but they are an environmentally friendly solution supporting a circular economy and providing the additional benefits of C02 and energy consumption reductions.
A sustainable future isn’t possible without PET, and since everyone’s health is paramount, Evertis is ensuring there is little disruption to the supply chain of PET films.
Evertis, present in the polymers industry since 1959 and pioneers in PET film extrusion, is a specialist in the production of barrier films for food packaging, and other packaging applications. With a wide variety of tailor-made solutions in their portfolio, Evertis focuses on supplying films that ensure product safety whilst closing the loop. Evertis envisions a future with increased utilisation of recycled content in their films, greater recyclability of their products and the lowest feasible carbon footprint.
Being a global business, with manufacturing sites in Portugal, Brazil, Italy and Mexico, Evertis is devoted to playing a role in society’s collective response to the global plastic waste challenge, through recycling education programs as well as jointly working across the value chain to create tangible solutions. Their mission is to develop future-fit packaging that meets the highest expectations of clients and end consumers in terms of food safety, functionality and circularity.
Given the unprecedented uncertainty caused by the global pandemic, Evertis, a global film producer known primarily for food applications, reminds the industry of their portfolio for medical applications such as face-shields. As this situation is dynamic and uncertain, Evertis is pleased to provide materials to produce essential personal protective equipment that promotes the health and well-being of workers, patients and society in general.
With worldwide distribution, Evertis supports customers throughout Europe and the Americas. In order to meet increasing demands of PETG films for face shields to protect against the COVID-19 virus, Evertis is starting up a new line, at their plant in Portugal, adding 12,000 tons per year. Line is due to initiate production in October of this year.
The IMG Group’s expansion plans are global. The Portuguese-based group also installed new capacity in their other two plants, Curitiba, Brazil and Monterrey, Mexico. Both plants increased capacity by 10,000 tons per year, Brazil as of April 2020 and Mexico just recently in August. Regarding the United States market, the convenient location of the Monterrey, Mexico facility allows the rapid response required to support the critical need for high quality, optical grade materials. Furthermore, additional capacity within the United States is in process for 2021.
Evertis’ expertise has helped guide the optimal fit and function of these materials for PPE (personal protective equipment):
- PET
- PETG
- GAG
Calibers available range from 7 mil to 35 mil. All structures can be supplied with anti-fog and anti-block additives.
Due to the Evertis’ coextrusion capabilities, the available raw material options are versatile with 100% virgin resin or virgin resin in combination with recycled content.
Evertis products are considered essential goods to support not only the food packaging industry, but also healthcare applications. Evertis has maintained normal operations and supported employee wellbeing throughout the pandemic while implementing critical precautions in response to the increased demand for hygiene, health care and food packaging products.
PET is fully recyclable and Evertis is committed to give PET a second life while guaranteeing it meets the quality and performance each application requires. PET face shields not only protect our front-line workers, but they are an environmentally friendly solution supporting a circular economy and providing the additional benefits of C02 and energy consumption reductions.
A sustainable future isn’t possible without PET, and since everyone’s health is paramount, Evertis is ensuring there is little disruption to the supply chain of PET films.
Evertis, present in the polymers industry since 1959 and pioneers in PET film extrusion, is a specialist in the production of barrier films for food packaging, and other packaging applications. With a wide variety of tailor-made solutions in their portfolio, Evertis focuses on supplying films that ensure product safety whilst closing the loop. Evertis envisions a future with increased utilisation of recycled content in their films, greater recyclability of their products and the lowest feasible carbon footprint.
Being a global business, with manufacturing sites in Portugal, Brazil, Italy and Mexico, Evertis is devoted to playing a role in society’s collective response to the global plastic waste challenge, through recycling education programs as well as jointly working across the value chain to create tangible solutions. Their mission is to develop future-fit packaging that meets the highest expectations of clients and end consumers in terms of food safety, functionality and circularity.
Given the unprecedented uncertainty caused by the global pandemic, Evertis, a global film producer known primarily for food applications, reminds the industry of their portfolio for medical applications such as face-shields. As this situation is dynamic and uncertain, Evertis is pleased to provide materials to produce essential personal protective equipment that promotes the health and well-being of workers, patients and society in general.
With worldwide distribution, Evertis supports customers throughout Europe and the Americas. In order to meet increasing demands of PETG films for face shields to protect against the COVID-19 virus, Evertis is starting up a new line, at their plant in Portugal, adding 12,000 tons per year. Line is due to initiate production in October of this year.
The IMG Group’s expansion plans are global. The Portuguese-based group also installed new capacity in their other two plants, Curitiba, Brazil and Monterrey, Mexico. Both plants increased capacity by 10,000 tons per year, Brazil as of April 2020 and Mexico just recently in August. Regarding the United States market, the convenient location of the Monterrey, Mexico facility allows the rapid response required to support the critical need for high quality, optical grade materials. Furthermore, additional capacity within the United States is in process for 2021.
Four partners have collaborated on an industry-leading recycling approach
Closed-loop economy for PET-based multilayer Green Deal-compliant
Further collaborations are planned to optimize the process harnessing water-based adhesive technology
Evertis’ expertise has helped guide the optimal fit and function of these materials for PPE (personal protective equipment):
- PET
- PETG
- GAG
Calibers available range from 7 mil to 35 mil. All structures can be supplied with anti-fog and anti-block additives.
Due to the Evertis’ coextrusion capabilities, the available raw material options are versatile with 100% virgin resin or virgin resin in combination with recycled content.
Evertis products are considered essential goods to support not only the food packaging industry, but also healthcare applications. Evertis has maintained normal operations and supported employee wellbeing throughout the pandemic while implementing critical precautions in response to the increased demand for hygiene, health care and food packaging products.
PET is fully recyclable and Evertis is committed to give PET a second life while guaranteeing it meets the quality and performance each application requires. PET face shields not only protect our front-line workers, but they are an environmentally friendly solution supporting a circular economy and providing the additional benefits of C02 and energy consumption reductions.
A sustainable future isn’t possible without PET, and since everyone’s health is paramount, Evertis is ensuring there is little disruption to the supply chain of PET films.
Evertis, present in the polymers industry since 1959 and pioneers in PET film extrusion, is a specialist in the production of barrier films for food packaging, and other packaging applications. With a wide variety of tailor-made solutions in their portfolio, Evertis focuses on supplying films that ensure product safety whilst closing the loop. Evertis envisions a future with increased utilisation of recycled content in their films, greater recyclability of their products and the lowest feasible carbon footprint.
Being a global business, with manufacturing sites in Portugal, Brazil, Italy and Mexico, Evertis is devoted to playing a role in society’s collective response to the global plastic waste challenge, through recycling education programs as well as jointly working across the value chain to create tangible solutions. Their mission is to develop future-fit packaging that meets the highest expectations of clients and end consumers in terms of food safety, functionality and circularity.
Given the unprecedented uncertainty caused by the global pandemic, Evertis, a global film producer known primarily for food applications, reminds the industry of their portfolio for medical applications such as face-shields. As this situation is dynamic and uncertain, Evertis is pleased to provide materials to produce essential personal protective equipment that promotes the health and well-being of workers, patients and society in general.
With worldwide distribution, Evertis supports customers throughout Europe and the Americas. In order to meet increasing demands of PETG films for face shields to protect against the COVID-19 virus, Evertis is starting up a new line, at their plant in Portugal, adding 12,000 tons per year. Line is due to initiate production in October of this year.
The IMG Group’s expansion plans are global. The Portuguese-based group also installed new capacity in their other two plants, Curitiba, Brazil and Monterrey, Mexico. Both plants increased capacity by 10,000 tons per year, Brazil as of April 2020 and Mexico just recently in August. Regarding the United States market, the convenient location of the Monterrey, Mexico facility allows the rapid response required to support the critical need for high quality, optical grade materials. Furthermore, additional capacity within the United States is in process for 2021.
Evertis’ expertise has helped guide the optimal fit and function of these materials for PPE (personal protective equipment):
- PET
- PETG
- GAG
Calibers available range from 7 mil to 35 mil. All structures can be supplied with anti-fog and anti-block additives.
Due to the Evertis’ coextrusion capabilities, the available raw material options are versatile with 100% virgin resin or virgin resin in combination with recycled content.
Evertis products are considered essential goods to support not only the food packaging industry, but also healthcare applications. Evertis has maintained normal operations and supported employee wellbeing throughout the pandemic while implementing critical precautions in response to the increased demand for hygiene, health care and food packaging products.
PET is fully recyclable and Evertis is committed to give PET a second life while guaranteeing it meets the quality and performance each application requires. PET face shields not only protect our front-line workers, but they are an environmentally friendly solution supporting a circular economy and providing the additional benefits of C02 and energy consumption reductions.
A sustainable future isn’t possible without PET, and since everyone’s health is paramount, Evertis is ensuring there is little disruption to the supply chain of PET films.
Evertis, present in the polymers industry since 1959 and pioneers in PET film extrusion, is a specialist in the production of barrier films for food packaging, and other packaging applications. With a wide variety of tailor-made solutions in their portfolio, Evertis focuses on supplying films that ensure product safety whilst closing the loop. Evertis envisions a future with increased utilisation of recycled content in their films, greater recyclability of their products and the lowest feasible carbon footprint.
Being a global business, with manufacturing sites in Portugal, Brazil, Italy and Mexico, Evertis is devoted to playing a role in society’s collective response to the global plastic waste challenge, through recycling education programs as well as jointly working across the value chain to create tangible solutions. Their mission is to develop future-fit packaging that meets the highest expectations of clients and end consumers in terms of food safety, functionality and circularity.
Given the unprecedented uncertainty caused by the global pandemic, Evertis, a global film producer known primarily for food applications, reminds the industry of their portfolio for medical applications such as face-shields. As this situation is dynamic and uncertain, Evertis is pleased to provide materials to produce essential personal protective equipment that promotes the health and well-being of workers, patients and society in general.
With worldwide distribution, Evertis supports customers throughout Europe and the Americas. In order to meet increasing demands of PETG films for face shields to protect against the COVID-19 virus, Evertis is starting up a new line, at their plant in Portugal, adding 12,000 tons per year. Line is due to initiate production in October of this year.
The IMG Group’s expansion plans are global. The Portuguese-based group also installed new capacity in their other two plants, Curitiba, Brazil and Monterrey, Mexico. Both plants increased capacity by 10,000 tons per year, Brazil as of April 2020 and Mexico just recently in August. Regarding the United States market, the convenient location of the Monterrey, Mexico facility allows the rapid response required to support the critical need for high quality, optical grade materials. Furthermore, additional capacity within the United States is in process for 2021.
Evertis’ expertise has helped guide the optimal fit and function of these materials for PPE (personal protective equipment):
- PET
- PETG
- GAG
Calibers available range from 7 mil to 35 mil. All structures can be supplied with anti-fog and anti-block additives.
Due to the Evertis’ coextrusion capabilities, the available raw material options are versatile with 100% virgin resin or virgin resin in combination with recycled content.
Evertis products are considered essential goods to support not only the food packaging industry, but also healthcare applications. Evertis has maintained normal operations and supported employee wellbeing throughout the pandemic while implementing critical precautions in response to the increased demand for hygiene, health care and food packaging products.
PET is fully recyclable and Evertis is committed to give PET a second life while guaranteeing it meets the quality and performance each application requires. PET face shields not only protect our front-line workers, but they are an environmentally friendly solution supporting a circular economy and providing the additional benefits of C02 and energy consumption reductions.
A sustainable future isn’t possible without PET, and since everyone’s health is paramount, Evertis is ensuring there is little disruption to the supply chain of PET films.
Evertis, present in the polymers industry since 1959 and pioneers in PET film extrusion, is a specialist in the production of barrier films for food packaging, and other packaging applications. With a wide variety of tailor-made solutions in their portfolio, Evertis focuses on supplying films that ensure product safety whilst closing the loop. Evertis envisions a future with increased utilisation of recycled content in their films, greater recyclability of their products and the lowest feasible carbon footprint.
Being a global business, with manufacturing sites in Portugal, Brazil, Italy and Mexico, Evertis is devoted to playing a role in society’s collective response to the global plastic waste challenge, through recycling education programs as well as jointly working across the value chain to create tangible solutions. Their mission is to develop future-fit packaging that meets the highest expectations of clients and end consumers in terms of food safety, functionality and circularity.
Given the unprecedented uncertainty caused by the global pandemic, Evertis, a global film producer known primarily for food applications, reminds the industry of their portfolio for medical applications such as face-shields. As this situation is dynamic and uncertain, Evertis is pleased to provide materials to produce essential personal protective equipment that promotes the health and well-being of workers, patients and society in general.
With worldwide distribution, Evertis supports customers throughout Europe and the Americas. In order to meet increasing demands of PETG films for face shields to protect against the COVID-19 virus, Evertis is starting up a new line, at their plant in Portugal, adding 12,000 tons per year. Line is due to initiate production in October of this year.
The IMG Group’s expansion plans are global. The Portuguese-based group also installed new capacity in their other two plants, Curitiba, Brazil and Monterrey, Mexico. Both plants increased capacity by 10,000 tons per year, Brazil as of April 2020 and Mexico just recently in August. Regarding the United States market, the convenient location of the Monterrey, Mexico facility allows the rapid response required to support the critical need for high quality, optical grade materials. Furthermore, additional capacity within the United States is in process for 2021.
Evertis’ expertise has helped guide the optimal fit and function of these materials for PPE (personal protective equipment):
- PET
- PETG
- GAG
Calibers available range from 7 mil to 35 mil. All structures can be supplied with anti-fog and anti-block additives.
Due to the Evertis’ coextrusion capabilities, the available raw material options are versatile with 100% virgin resin or virgin resin in combination with recycled content.
Evertis products are considered essential goods to support not only the food packaging industry, but also healthcare applications. Evertis has maintained normal operations and supported employee wellbeing throughout the pandemic while implementing critical precautions in response to the increased demand for hygiene, health care and food packaging products.
PET is fully recyclable and Evertis is committed to give PET a second life while guaranteeing it meets the quality and performance each application requires. PET face shields not only protect our front-line workers, but they are an environmentally friendly solution supporting a circular economy and providing the additional benefits of C02 and energy consumption reductions.
A sustainable future isn’t possible without PET, and since everyone’s health is paramount, Evertis is ensuring there is little disruption to the supply chain of PET films.
Evertis, present in the polymers industry since 1959 and pioneers in PET film extrusion, is a specialist in the production of barrier films for food packaging, and other packaging applications. With a wide variety of tailor-made solutions in their portfolio, Evertis focuses on supplying films that ensure product safety whilst closing the loop. Evertis envisions a future with increased utilisation of recycled content in their films, greater recyclability of their products and the lowest feasible carbon footprint.
Being a global business, with manufacturing sites in Portugal, Brazil, Italy and Mexico, Evertis is devoted to playing a role in society’s collective response to the global plastic waste challenge, through recycling education programs as well as jointly working across the value chain to create tangible solutions. Their mission is to develop future-fit packaging that meets the highest expectations of clients and end consumers in terms of food safety, functionality and circularity.
Given the unprecedented uncertainty caused by the global pandemic, Evertis, a global film producer known primarily for food applications, reminds the industry of their portfolio for medical applications such as face-shields. As this situation is dynamic and uncertain, Evertis is pleased to provide materials to produce essential personal protective equipment that promotes the health and well-being of workers, patients and society in general.
With worldwide distribution, Evertis supports customers throughout Europe and the Americas. In order to meet increasing demands of PETG films for face shields to protect against the COVID-19 virus, Evertis is starting up a new line, at their plant in Portugal, adding 12,000 tons per year. Line is due to initiate production in October of this year.
The IMG Group’s expansion plans are global. The Portuguese-based group also installed new capacity in their other two plants, Curitiba, Brazil and Monterrey, Mexico. Both plants increased capacity by 10,000 tons per year, Brazil as of April 2020 and Mexico just recently in August. Regarding the United States market, the convenient location of the Monterrey, Mexico facility allows the rapid response required to support the critical need for high quality, optical grade materials. Furthermore, additional capacity within the United States is in process for 2021.
The traceability of the recycled raw materials involved in the manufacture of the film and the management of plastic waste resulting from the production process.
The percentage content of recycled plastic incorporated into the film manufactured over a certain period of analysis, in accordance with the EN 15343 standard.
Evertis’ expertise has helped guide the optimal fit and function of these materials for PPE (personal protective equipment):
- PET
- PETG
- GAG
Calibers available range from 7 mil to 35 mil. All structures can be supplied with anti-fog and anti-block additives.
Due to the Evertis’ coextrusion capabilities, the available raw material options are versatile with 100% virgin resin or virgin resin in combination with recycled content.
Evertis products are considered essential goods to support not only the food packaging industry, but also healthcare applications. Evertis has maintained normal operations and supported employee wellbeing throughout the pandemic while implementing critical precautions in response to the increased demand for hygiene, health care and food packaging products.
PET is fully recyclable and Evertis is committed to give PET a second life while guaranteeing it meets the quality and performance each application requires. PET face shields not only protect our front-line workers, but they are an environmentally friendly solution supporting a circular economy and providing the additional benefits of C02 and energy consumption reductions.
Evertis, present in the polymers industry since 1959 and pioneers in PET film extrusion, is a specialist in the production of barrier films for food packaging, and other packaging applications. With a wide variety of tailor-made solutions in their portfolio, Evertis focuses on supplying films that ensure product safety whilst closing the loop. Evertis envisions a future with increased utilisation of recycled content in their films, greater recyclability of their products and the lowest feasible carbon footprint.
Being a global business, with manufacturing sites in Portugal, Brazil, Italy and Mexico, Evertis is devoted to playing a role in society’s collective response to the global plastic waste challenge, through recycling education programs as well as jointly working across the value chain to create tangible solutions. Their mission is to develop future-fit packaging that meets the highest expectations of clients and end consumers in terms of food safety, functionality and circularity.
Given the unprecedented uncertainty caused by the global pandemic, Evertis, a global film producer known primarily for food applications, reminds the industry of their portfolio for medical applications such as face-shields. As this situation is dynamic and uncertain, Evertis is pleased to provide materials to produce essential personal protective equipment that promotes the health and well-being of workers, patients and society in general.
With worldwide distribution, Evertis supports customers throughout Europe and the Americas. In order to meet increasing demands of PETG films for face shields to protect against the COVID-19 virus, Evertis is starting up a new line, at their plant in Portugal, adding 12,000 tons per year. Line is due to initiate production in October of this year.
The IMG Group’s expansion plans are global. The Portuguese-based group also installed new capacity in their other two plants, Curitiba, Brazil and Monterrey, Mexico. Both plants increased capacity by 10,000 tons per year, Brazil as of April 2020 and Mexico just recently in August. Regarding the United States market, the convenient location of the Monterrey, Mexico facility allows the rapid response required to support the critical need for high quality, optical grade materials. Furthermore, additional capacity within the United States is in process for 2021.
Rationalising the use of energy and natural resources and act on the processes to optimise and reduce consumption.
Reducing waste production by increasing and promoting the recycling and recovery of materials whenever possible.
Guaranteeing that the materials and procedures used don’t present any risk to the health of workers and the environment.
Ensuring that the use of materials, resources and the incorporation of safe and innovative technologies promote environmental protection and minimise environmental impacts.
Training and involving employees in conscious and responsible action, given the importance of everyone in ensuring product safety and improving environmental performance.
Implementing good practices in order to comply with applicable legislation and other requirements that lead to environmental preservation.
Evertis’ expertise has helped guide the optimal fit and function of these materials for PPE (personal protective equipment):
- PET
- PETG
- GAG
Calibers available range from 7 mil to 35 mil. All structures can be supplied with anti-fog and anti-block additives.
Due to the Evertis’ coextrusion capabilities, the available raw material options are versatile with 100% virgin resin or virgin resin in combination with recycled content.
Evertis products are considered essential goods to support not only the food packaging industry, but also healthcare applications. Evertis has maintained normal operations and supported employee wellbeing throughout the pandemic while implementing critical precautions in response to the increased demand for hygiene, health care and food packaging products.
PET is fully recyclable and Evertis is committed to give PET a second life while guaranteeing it meets the quality and performance each application requires. PET face shields not only protect our front-line workers, but they are an environmentally friendly solution supporting a circular economy and providing the additional benefits of C02 and energy consumption reductions.
Evertis, present in the polymers industry since 1959 and pioneers in PET film extrusion, is a specialist in the production of barrier films for food packaging, and other packaging applications. With a wide variety of tailor-made solutions in their portfolio, Evertis focuses on supplying films that ensure product safety whilst closing the loop. Evertis envisions a future with increased utilisation of recycled content in their films, greater recyclability of their products and the lowest feasible carbon footprint.
Being a global business, with manufacturing sites in Portugal, Brazil, Italy and Mexico, Evertis is devoted to playing a role in society’s collective response to the global plastic waste challenge, through recycling education programs as well as jointly working across the value chain to create tangible solutions. Their mission is to develop future-fit packaging that meets the highest expectations of clients and end consumers in terms of food safety, functionality and circularity.
Given the unprecedented uncertainty caused by the global pandemic, Evertis, a global film producer known primarily for food applications, reminds the industry of their portfolio for medical applications such as face-shields. As this situation is dynamic and uncertain, Evertis is pleased to provide materials to produce essential personal protective equipment that promotes the health and well-being of workers, patients and society in general.
With worldwide distribution, Evertis supports customers throughout Europe and the Americas. In order to meet increasing demands of PETG films for face shields to protect against the COVID-19 virus, Evertis is starting up a new line, at their plant in Portugal, adding 12,000 tons per year. Line is due to initiate production in October of this year.
The IMG Group’s expansion plans are global. The Portuguese-based group also installed new capacity in their other two plants, Curitiba, Brazil and Monterrey, Mexico. Both plants increased capacity by 10,000 tons per year, Brazil as of April 2020 and Mexico just recently in August. Regarding the United States market, the convenient location of the Monterrey, Mexico facility allows the rapid response required to support the critical need for high quality, optical grade materials. Furthermore, additional capacity within the United States is in process for 2021.
Evertis’ expertise has helped guide the optimal fit and function of these materials for PPE (personal protective equipment):
- PET
- PETG
- GAG
Calibers available range from 7 mil to 35 mil. All structures can be supplied with anti-fog and anti-block additives.
Due to the Evertis’ coextrusion capabilities, the available raw material options are versatile with 100% virgin resin or virgin resin in combination with recycled content.
Evertis products are considered essential goods to support not only the food packaging industry, but also healthcare applications. Evertis has maintained normal operations and supported employee wellbeing throughout the pandemic while implementing critical precautions in response to the increased demand for hygiene, health care and food packaging products.
PET is fully recyclable and Evertis is committed to give PET a second life while guaranteeing it meets the quality and performance each application requires. PET face shields not only protect our front-line workers, but they are an environmentally friendly solution supporting a circular economy and providing the additional benefits of C02 and energy consumption reductions.
Evertis, present in the polymers industry since 1959 and pioneers in PET film extrusion, is a specialist in the production of barrier films for food packaging, and other packaging applications. With a wide variety of tailor-made solutions in their portfolio, Evertis focuses on supplying films that ensure product safety whilst closing the loop. Evertis envisions a future with increased utilisation of recycled content in their films, greater recyclability of their products and the lowest feasible carbon footprint.
Being a global business, with manufacturing sites in Portugal, Brazil, Italy and Mexico, Evertis is devoted to playing a role in society’s collective response to the global plastic waste challenge, through recycling education programs as well as jointly working across the value chain to create tangible solutions. Their mission is to develop future-fit packaging that meets the highest expectations of clients and end consumers in terms of food safety, functionality and circularity.
Based on annual capacity
“Baseline report on plastic waste,” UNEP, 2020
Given the unprecedented uncertainty caused by the global pandemic, Evertis, a global film producer known primarily for food applications, reminds the industry of their portfolio for medical applications such as face-shields. As this situation is dynamic and uncertain, Evertis is pleased to provide materials to produce essential personal protective equipment that promotes the health and well-being of workers, patients and society in general.
With worldwide distribution, Evertis supports customers throughout Europe and the Americas. In order to meet increasing demands of PETG films for face shields to protect against the COVID-19 virus, Evertis is starting up a new line, at their plant in Portugal, adding 12,000 tons per year. Line is due to initiate production in October of this year.
The IMG Group’s expansion plans are global. The Portuguese-based group also installed new capacity in their other two plants, Curitiba, Brazil and Monterrey, Mexico. Both plants increased capacity by 10,000 tons per year, Brazil as of April 2020 and Mexico just recently in August. Regarding the United States market, the convenient location of the Monterrey, Mexico facility allows the rapid response required to support the critical need for high quality, optical grade materials. Furthermore, additional capacity within the United States is in process for 2021.
Evertis’ expertise has helped guide the optimal fit and function of these materials for PPE (personal protective equipment):
- PET
- PETG
- GAG
Calibers available range from 7 mil to 35 mil. All structures can be supplied with anti-fog and anti-block additives.
Due to the Evertis’ coextrusion capabilities, the available raw material options are versatile with 100% virgin resin or virgin resin in combination with recycled content.
Evertis products are considered essential goods to support not only the food packaging industry, but also healthcare applications. Evertis has maintained normal operations and supported employee wellbeing throughout the pandemic while implementing critical precautions in response to the increased demand for hygiene, health care and food packaging products.
PET is fully recyclable and Evertis is committed to give PET a second life while guaranteeing it meets the quality and performance each application requires. PET face shields not only protect our front-line workers, but they are an environmentally friendly solution supporting a circular economy and providing the additional benefits of C02 and energy consumption reductions.
Evertis, present in the polymers industry since 1959 and pioneers in PET film extrusion, is a specialist in the production of barrier films for food packaging, and other packaging applications. With a wide variety of tailor-made solutions in their portfolio, Evertis focuses on supplying films that ensure product safety whilst closing the loop. Evertis envisions a future with increased utilisation of recycled content in their films, greater recyclability of their products and the lowest feasible carbon footprint.
Being a global business, with manufacturing sites in Portugal, Brazil, Italy and Mexico, Evertis is devoted to playing a role in society’s collective response to the global plastic waste challenge, through recycling education programs as well as jointly working across the value chain to create tangible solutions. Their mission is to develop future-fit packaging that meets the highest expectations of clients and end consumers in terms of food safety, functionality and circularity.
Given the unprecedented uncertainty caused by the global pandemic, Evertis, a global film producer known primarily for food applications, reminds the industry of their portfolio for medical applications such as face-shields. As this situation is dynamic and uncertain, Evertis is pleased to provide materials to produce essential personal protective equipment that promotes the health and well-being of workers, patients and society in general.
With worldwide distribution, Evertis supports customers throughout Europe and the Americas. In order to meet increasing demands of PETG films for face shields to protect against the COVID-19 virus, Evertis is starting up a new line, at their plant in Portugal, adding 12,000 tons per year. Line is due to initiate production in October of this year.
The IMG Group’s expansion plans are global. The Portuguese-based group also installed new capacity in their other two plants, Curitiba, Brazil and Monterrey, Mexico. Both plants increased capacity by 10,000 tons per year, Brazil as of April 2020 and Mexico just recently in August. Regarding the United States market, the convenient location of the Monterrey, Mexico facility allows the rapid response required to support the critical need for high quality, optical grade materials. Furthermore, additional capacity within the United States is in process for 2021.
Evertis’ expertise has helped guide the optimal fit and function of these materials for PPE (personal protective equipment):
- PET
- PETG
- GAG
Calibers available range from 7 mil to 35 mil. All structures can be supplied with anti-fog and anti-block additives.
Due to the Evertis’ coextrusion capabilities, the available raw material options are versatile with 100% virgin resin or virgin resin in combination with recycled content.
Evertis products are considered essential goods to support not only the food packaging industry, but also healthcare applications. Evertis has maintained normal operations and supported employee wellbeing throughout the pandemic while implementing critical precautions in response to the increased demand for hygiene, health care and food packaging products.
PET is fully recyclable and Evertis is committed to give PET a second life while guaranteeing it meets the quality and performance each application requires. PET face shields not only protect our front-line workers, but they are an environmentally friendly solution supporting a circular economy and providing the additional benefits of C02 and energy consumption reductions.
Evertis, present in the polymers industry since 1959 and pioneers in PET film extrusion, is a specialist in the production of barrier films for food packaging, and other packaging applications. With a wide variety of tailor-made solutions in their portfolio, Evertis focuses on supplying films that ensure product safety whilst closing the loop. Evertis envisions a future with increased utilisation of recycled content in their films, greater recyclability of their products and the lowest feasible carbon footprint.
Being a global business, with manufacturing sites in Portugal, Brazil, Italy and Mexico, Evertis is devoted to playing a role in society’s collective response to the global plastic waste challenge, through recycling education programs as well as jointly working across the value chain to create tangible solutions. Their mission is to develop future-fit packaging that meets the highest expectations of clients and end consumers in terms of food safety, functionality and circularity.
Given the unprecedented uncertainty caused by the global pandemic, Evertis, a global film producer known primarily for food applications, reminds the industry of their portfolio for medical applications such as face-shields. As this situation is dynamic and uncertain, Evertis is pleased to provide materials to produce essential personal protective equipment that promotes the health and well-being of workers, patients and society in general.
With worldwide distribution, Evertis supports customers throughout Europe and the Americas. In order to meet increasing demands of PETG films for face shields to protect against the COVID-19 virus, Evertis is starting up a new line, at their plant in Portugal, adding 12,000 tons per year. Line is due to initiate production in October of this year.
The IMG Group’s expansion plans are global. The Portuguese-based group also installed new capacity in their other two plants, Curitiba, Brazil and Monterrey, Mexico. Both plants increased capacity by 10,000 tons per year, Brazil as of April 2020 and Mexico just recently in August. Regarding the United States market, the convenient location of the Monterrey, Mexico facility allows the rapid response required to support the critical need for high quality, optical grade materials. Furthermore, additional capacity within the United States is in process for 2021.
Evertis’ expertise has helped guide the optimal fit and function of these materials for PPE (personal protective equipment):
- PET
- PETG
- GAG
Calibers available range from 7 mil to 35 mil. All structures can be supplied with anti-fog and anti-block additives.
Due to the Evertis’ coextrusion capabilities, the available raw material options are versatile with 100% virgin resin or virgin resin in combination with recycled content.
Evertis products are considered essential goods to support not only the food packaging industry, but also healthcare applications. Evertis has maintained normal operations and supported employee wellbeing throughout the pandemic while implementing critical precautions in response to the increased demand for hygiene, health care and food packaging products.
PET is fully recyclable and Evertis is committed to give PET a second life while guaranteeing it meets the quality and performance each application requires. PET face shields not only protect our front-line workers, but they are an environmentally friendly solution supporting a circular economy and providing the additional benefits of C02 and energy consumption reductions.
Evertis, present in the polymers industry since 1959 and pioneers in PET film extrusion, is a specialist in the production of barrier films for food packaging, and other packaging applications. With a wide variety of tailor-made solutions in their portfolio, Evertis focuses on supplying films that ensure product safety whilst closing the loop. Evertis envisions a future with increased utilisation of recycled content in their films, greater recyclability of their products and the lowest feasible carbon footprint.
Being a global business, with manufacturing sites in Portugal, Brazil, Italy and Mexico, Evertis is devoted to playing a role in society’s collective response to the global plastic waste challenge, through recycling education programs as well as jointly working across the value chain to create tangible solutions. Their mission is to develop future-fit packaging that meets the highest expectations of clients and end consumers in terms of food safety, functionality and circularity.
Given the unprecedented uncertainty caused by the global pandemic, Evertis, a global film producer known primarily for food applications, reminds the industry of their portfolio for medical applications such as face-shields. As this situation is dynamic and uncertain, Evertis is pleased to provide materials to produce essential personal protective equipment that promotes the health and well-being of workers, patients and society in general.
With worldwide distribution, Evertis supports customers throughout Europe and the Americas. In order to meet increasing demands of PETG films for face shields to protect against the COVID-19 virus, Evertis is starting up a new line, at their plant in Portugal, adding 12,000 tons per year. Line is due to initiate production in October of this year.
The IMG Group’s expansion plans are global. The Portuguese-based group also installed new capacity in their other two plants, Curitiba, Brazil and Monterrey, Mexico. Both plants increased capacity by 10,000 tons per year, Brazil as of April 2020 and Mexico just recently in August. Regarding the United States market, the convenient location of the Monterrey, Mexico facility allows the rapid response required to support the critical need for high quality, optical grade materials. Furthermore, additional capacity within the United States is in process for 2021.
Evertis’ expertise has helped guide the optimal fit and function of these materials for PPE (personal protective equipment):
- PET
- PETG
- GAG
Calibers available range from 7 mil to 35 mil. All structures can be supplied with anti-fog and anti-block additives.
Due to the Evertis’ coextrusion capabilities, the available raw material options are versatile with 100% virgin resin or virgin resin in combination with recycled content.
Evertis products are considered essential goods to support not only the food packaging industry, but also healthcare applications. Evertis has maintained normal operations and supported employee wellbeing throughout the pandemic while implementing critical precautions in response to the increased demand for hygiene, health care and food packaging products.
PET is fully recyclable and Evertis is committed to give PET a second life while guaranteeing it meets the quality and performance each application requires. PET face shields not only protect our front-line workers, but they are an environmentally friendly solution supporting a circular economy and providing the additional benefits of C02 and energy consumption reductions.
Evertis, present in the polymers industry since 1959 and pioneers in PET film extrusion, is a specialist in the production of barrier films for food packaging, and other packaging applications. With a wide variety of tailor-made solutions in their portfolio, Evertis focuses on supplying films that ensure product safety whilst closing the loop. Evertis envisions a future with increased utilisation of recycled content in their films, greater recyclability of their products and the lowest feasible carbon footprint.
Being a global business, with manufacturing sites in Portugal, Brazil, Italy and Mexico, Evertis is devoted to playing a role in society’s collective response to the global plastic waste challenge, through recycling education programs as well as jointly working across the value chain to create tangible solutions. Their mission is to develop future-fit packaging that meets the highest expectations of clients and end consumers in terms of food safety, functionality and circularity.
Given the unprecedented uncertainty caused by the global pandemic, Evertis, a global film producer known primarily for food applications, reminds the industry of their portfolio for medical applications such as face-shields. As this situation is dynamic and uncertain, Evertis is pleased to provide materials to produce essential personal protective equipment that promotes the health and well-being of workers, patients and society in general.
With worldwide distribution, Evertis supports customers throughout Europe and the Americas. In order to meet increasing demands of PETG films for face shields to protect against the COVID-19 virus, Evertis is starting up a new line, at their plant in Portugal, adding 12,000 tons per year. Line is due to initiate production in October of this year.
The IMG Group’s expansion plans are global. The Portuguese-based group also installed new capacity in their other two plants, Curitiba, Brazil and Monterrey, Mexico. Both plants increased capacity by 10,000 tons per year, Brazil as of April 2020 and Mexico just recently in August. Regarding the United States market, the convenient location of the Monterrey, Mexico facility allows the rapid response required to support the critical need for high quality, optical grade materials. Furthermore, additional capacity within the United States is in process for 2021.
Evertis’ expertise has helped guide the optimal fit and function of these materials for PPE (personal protective equipment):
- PET
- PETG
- GAG
Calibers available range from 7 mil to 35 mil. All structures can be supplied with anti-fog and anti-block additives.
Due to the Evertis’ coextrusion capabilities, the available raw material options are versatile with 100% virgin resin or virgin resin in combination with recycled content.
Evertis products are considered essential goods to support not only the food packaging industry, but also healthcare applications. Evertis has maintained normal operations and supported employee wellbeing throughout the pandemic while implementing critical precautions in response to the increased demand for hygiene, health care and food packaging products.
PET is fully recyclable and Evertis is committed to give PET a second life while guaranteeing it meets the quality and performance each application requires. PET face shields not only protect our front-line workers, but they are an environmentally friendly solution supporting a circular economy and providing the additional benefits of C02 and energy consumption reductions.
Evertis, present in the polymers industry since 1959 and pioneers in PET film extrusion, is a specialist in the production of barrier films for food packaging, and other packaging applications. With a wide variety of tailor-made solutions in their portfolio, Evertis focuses on supplying films that ensure product safety whilst closing the loop. Evertis envisions a future with increased utilisation of recycled content in their films, greater recyclability of their products and the lowest feasible carbon footprint.
Being a global business, with manufacturing sites in Portugal, Brazil, Italy and Mexico, Evertis is devoted to playing a role in society’s collective response to the global plastic waste challenge, through recycling education programs as well as jointly working across the value chain to create tangible solutions. Their mission is to develop future-fit packaging that meets the highest expectations of clients and end consumers in terms of food safety, functionality and circularity.
Given the unprecedented uncertainty caused by the global pandemic, Evertis, a global film producer known primarily for food applications, reminds the industry of their portfolio for medical applications such as face-shields. As this situation is dynamic and uncertain, Evertis is pleased to provide materials to produce essential personal protective equipment that promotes the health and well-being of workers, patients and society in general.
With worldwide distribution, Evertis supports customers throughout Europe and the Americas. In order to meet increasing demands of PETG films for face shields to protect against the COVID-19 virus, Evertis is starting up a new line, at their plant in Portugal, adding 12,000 tons per year. Line is due to initiate production in October of this year.
The IMG Group’s expansion plans are global. The Portuguese-based group also installed new capacity in their other two plants, Curitiba, Brazil and Monterrey, Mexico. Both plants increased capacity by 10,000 tons per year, Brazil as of April 2020 and Mexico just recently in August. Regarding the United States market, the convenient location of the Monterrey, Mexico facility allows the rapid response required to support the critical need for high quality, optical grade materials. Furthermore, additional capacity within the United States is in process for 2021.
Evertis’ expertise has helped guide the optimal fit and function of these materials for PPE (personal protective equipment):
- PET
- PETG
- GAG
Calibers available range from 7 mil to 35 mil. All structures can be supplied with anti-fog and anti-block additives.
Due to the Evertis’ coextrusion capabilities, the available raw material options are versatile with 100% virgin resin or virgin resin in combination with recycled content.
Evertis products are considered essential goods to support not only the food packaging industry, but also healthcare applications. Evertis has maintained normal operations and supported employee wellbeing throughout the pandemic while implementing critical precautions in response to the increased demand for hygiene, health care and food packaging products.
PET is fully recyclable and Evertis is committed to give PET a second life while guaranteeing it meets the quality and performance each application requires. PET face shields not only protect our front-line workers, but they are an environmentally friendly solution supporting a circular economy and providing the additional benefits of C02 and energy consumption reductions.
A sustainable future isn’t possible without PET, and since everyone’s health is paramount, Evertis is ensuring there is little disruption to the supply chain of PET films.
Given the unprecedented uncertainty caused by the global pandemic, Evertis, a global film producer known primarily for food applications, reminds the industry of their portfolio for medical applications such as face-shields. As this situation is dynamic and uncertain, Evertis is pleased to provide materials to produce essential personal protective equipment that promotes the health and well-being of workers, patients and society in general.
With worldwide distribution, Evertis supports customers throughout Europe and the Americas. In order to meet increasing demands of PETG films for face shields to protect against the COVID-19 virus, Evertis is starting up a new line, at their plant in Portugal, adding 12,000 tons per year. Line is due to initiate production in October of this year.
The IMG Group’s expansion plans are global. The Portuguese-based group also installed new capacity in their other two plants, Curitiba, Brazil and Monterrey, Mexico. Both plants increased capacity by 10,000 tons per year, Brazil as of April 2020 and Mexico just recently in August. Regarding the United States market, the convenient location of the Monterrey, Mexico facility allows the rapid response required to support the critical need for high quality, optical grade materials. Furthermore, additional capacity within the United States is in process for 2021.
Evertis’ expertise has helped guide the optimal fit and function of these materials for PPE (personal protective equipment):
- PET
- PETG
- GAG
Calibers available range from 7 mil to 35 mil. All structures can be supplied with anti-fog and anti-block additives.
Due to the Evertis’ coextrusion capabilities, the available raw material options are versatile with 100% virgin resin or virgin resin in combination with recycled content.
Evertis products are considered essential goods to support not only the food packaging industry, but also healthcare applications. Evertis has maintained normal operations and supported employee wellbeing throughout the pandemic while implementing critical precautions in response to the increased demand for hygiene, health care and food packaging products.
PET is fully recyclable and Evertis is committed to give PET a second life while guaranteeing it meets the quality and performance each application requires. PET face shields not only protect our front-line workers, but they are an environmentally friendly solution supporting a circular economy and providing the additional benefits of C02 and energy consumption reductions.
A sustainable future isn’t possible without PET, and since everyone’s health is paramount, Evertis is ensuring there is little disruption to the supply chain of PET films.
